Home » Applications » Bridge Monitoring
ROADS, RAIL AND TRANSPORT INFRASTRUCTURE

Understand bridge behaviour.
Plan with confidence.

Bridge monitoring instrumentation and support for local road bridges, major crossings and ageing structures. Track movement, structural resonances and water levels to support engineering assessments and informed asset decisions.

Ageing assets. Limited budgets.

Bridges respond to traffic, temperature, wind and changes around their foundations. Over time, ageing materials, deterioration and changing loads can affect how a structure behaves.

From a small council crossing to a major transport link, owners must balance ageing structures, changing traffic demands and limited maintenance budgets. Where concerns arise, weight restrictions, speed limits or repairs may be necessary.

Monitoring helps owners and engineers understand bridge behaviour between inspections. It provides a record of movement, vibration and other measurements to support investigations, reviews of operating restrictions and decisions about repair, strengthening or replacement.

For councils and infrastructure owners, this evidence helps prioritise maintenance across a portfolio and supports informed decisions about the continued use of existing assets.

Identify changes early

Track trends and unusual readings so your engineering team can investigate changes against established behaviour and agreed response criteria.

Prioritise maintenance

Use monitoring records alongside inspections to help target investigations, plan repairs and allocate maintenance budgets.

Support asset life extension

Provide evidence for engineering decisions about continued use, repair or strengthening, helping retain existing infrastructure where appropriate.

Long term reliability

Monitoring throughout the bridge lifecycle

Monitoring requirements change from construction through to everyday operation and rehabilitation. Focus the instrumentation on the measurements your engineering team needs at each stage.

Construction and commissioning

Track movement, strain, bearing loads and vibration during construction stages or engineer-specified load tests. Establish baseline readings for future comparison.

Operational bridges

Monitor known defects and structural response under everyday conditions. Record significant events to support inspections and ongoing asset management.

Repairs and rehabilitation

Compare behaviour before, during and after strengthening, bearing replacement or other remedial works against the engineering team’s agreed criteria.

Bridge Monitoring Instrumentation

Select instrumentation around the concern being investigated, the bridge’s structural arrangement and the data your engineers need. Monitoring can start at one location and expand as requirements develop.

Crack & Joint Movement

Crackmeters

Measure opening and closing across existing cracks or joints. Review movement alongside temperature, loading and remedial works to help engineers assess whether behaviour is changing.


Typical applications: known cracks, structural joints and rehabilitation works.

Rotation & Inclination

Tiltmeters

Measure changes in inclination at selected piers, abutments and structural elements. Track gradual rotation or event-related movement against an established baseline.


Typical applications: pier and abutment rotation, support movement and long-term inclination trends.

Dynamic Response

Accelerometers

Record how a bridge vibrates under traffic, wind and other excitation. Suitable monitoring systems support specialist analysis of natural frequencies, mode shapes and damping.


Typical applications: dynamic response monitoring, ambient vibration testing and event comparisons.

LoadING

Load and strain

Measure loads at suitable bearings or supports and strain in selected structural elements. Help engineers investigate load distribution and response under defined conditions.


Typical applications: bearing reactions, load testing and strengthening assessments.

Movement

Temperature & displacement

Track temperature alongside deck, bearing and joint movement. Help engineers distinguish expected thermal behaviour from changes that need further investigation.


Typical applications: expansion joints, bearing travel and temperature-related movement.

Weather events

Water-level & scour

Measure water levels and, with suitable dedicated instruments, changes in bed level near foundations. Build a record of conditions during and after high-flow events.


Typical applications: river crossings, flood-prone bridges and scour investigations.

Dynamic Repsonse
Flood levels & Scour

Rising water and changes around bridge foundations can be difficult to assess during a flood. Monitoring provides a record of conditions before, during and after an event to support inspections and engineering review.

Track water levels
Record river levels and configure alerts at agreed thresholds to support the asset owner’s flood response procedures.

Review structural movement
Tilt and displacement measurements provide additional information about how the structure responds. Used alongside water-level and scour records, they help build a clearer picture of an event.

Durability & Assessment

Coastal exposure, immersion, debris and difficult access influence the selection of sensors, enclosures, cables and mountings. Plan for corrosion resistance, secure installation and ongoing maintenance. Investigating chloride-related deterioration requires appropriate inspection and testing alongside structural monitoring.

Define the monitoring scope with the responsible engineer, taking account of relevant standards, authority requirements and the decisions the data needs to support.

ReferenceRole in monitoring
AS 5100.7: Bridge assessmentAssessment of existing bridges, including load rating, as applicable to the asset and assessment scope.
Austroads Guide to Bridge Technology, Part 7Guidance on managing existing bridges, including inspection, testing, structural monitoring and engineering assessment.
Austroads Guideline for Flood Response and Recovery for BridgesGuidance on scour risk, flood response, monitoring and post-event assessment.
Asset owner and authority requirementsProject-specific monitoring criteria, inspection programmes, alert thresholds and agreed response procedures.

Monitoring supports compliance and engineering assessment. Instrumentation alone does not establish dam safety or demonstrate compliance.

Asset Management

Prioritise investigations

Use recorded changes to help identify which assets or locations need closer attention. Give engineers evidence to target inspections and further testing.

Inform your risk register

Add monitoring trends and event records to each asset’s history. Support reviews of identified risks, existing controls and outstanding actions.

Plan maintenance and repairs

Review measurements alongside condition assessments to help prioritise repairs, scope rehabilitation and assess the response after work is complete.

Support continued service

Build evidence for engineering decisions about continued use, strengthening or replacement. Where assessment supports retaining an asset, extending its service life can reduce demand for new materials and replacement works.

Instrumentation & Project Support

Support from selection to ongoing monitoring

Metric Dynamics helps you put the agreed monitoring scope into practice, with instrumentation, data access and practical support suited to your bridge.

Selection and supply

Select instrumentation, mounting arrangements and data loggers around the measurements your engineer requires, site conditions and available budget.

Installation and commissioning

Coordinate installation support, instrument configuration, power and connectivity. Establish baseline readings and check data access and alerts before handover.

Ongoing support

Keep your monitoring system useful with troubleshooting, instrument checks and servicing coordination. Expand or adapt the system as your requirements change.

Your questions

Roads, rail & transport monitoring FAQs

What is the difference between static and dynamic bridge monitoring?

Static monitoring tracks gradual changes through time-stamped readings, such as crack opening, tilt, strain and displacement. These measurements show how conditions change over hours, days or years.

Dynamic monitoring captures the bridge’s vibration response to identify structural resonances, including natural frequencies, mode shapes and damping. Tracking these characteristics helps engineers investigate changes in structural behaviour.

Both approaches provide complementary information: static monitoring tracks movement and deformation, while dynamic monitoring examines how the structure vibrates.

Can you help with a small council bridge?


Yes. Monitoring can focus on a single concern, such as an existing crack, pier movement or rising water levels. We can help select instrumentation around the bridge, your engineer’s requirements and the available budget, from local crossings to major road and rail structures.

Can monitoring tell us whether weight or speed restrictions are still needed?


Monitoring can contribute evidence to that assessment, including pre and post strengthening works or repairs. Readings alone do not establish a bridge’s load capacity. The responsible engineer considers monitoring results alongside inspections, structural analysis and other relevant information to advise the asset owner on operating restrictions.

Does monitoring replace bridge inspections?


Monitoring complements inspections by recording how a bridge behaves between site visits and during significant events. It gives engineers additional evidence to target investigations and plan maintenance.

As monitoring technology develops, owners can incorporate remote measurements and automated alerts into their asset management programmes. Physical inspections remain important for identifying deterioration and investigating changes that sensors may not capture.

Can a change in resonant frequency indicate damage?

A change can warrant investigation, but it does not prove damage. Natural frequencies can also change with temperature, traffic loading and support conditions.

Engineers compare results against an established baseline and account for environmental and operating conditions. Persistent or unexplained changes can help target inspections and further assessment. Equally, unchanged frequencies do not rule out local deterioration.

Can monitoring help us decide whether to close or reopen a bridge?

Yes. Monitoring can provide evidence for closure, reopening and operating restrictions, particularly during floods or following unusual movement. Agreed thresholds can trigger alerts and actions within the asset owner’s response plan.

Readings alone do not confirm that a bridge is safe to reopen. The responsible engineer and asset owner consider monitoring records alongside inspections, structural assessment and event conditions when deciding the next step.

Talk to Metric Dynamics